4 Start-Up
CPU 01
Page 26 of 40
HI 800 189 E Rev. 1.01
4.2 Configuration
The CPU 01 module can be configured using a programming tool, SILworX or ELOP II
Factory. Which programming tool should be used depends on the revision status of the
operating system (firmware):
ELOP II Factory is required for operating system versions prior to 7.
SILworX is required for operating system version 7 and beyond.
i
ELOP II Factory is required to load a new operating system (version 7 or beyond) into a
controller with a CPU operating system version prior to 7. SILworX is then required once
the loading procedure is completed.
4.2.1 Module
Slots
Slots 1 and 2 on the F60 module rack are reserved for the PS 01 power supply module and
CPU module, respectively. Any type of I/O modules can be plugged in to slots 3...8.
The module slots in SILworX and ELOP II Factory are numbered as follows:
Module
Slot on the rack
Slot in SILworX
Slot in ELOP II
Factory
PS 01
1
-
-
CPU/COM 2
0/1
-
I/O 3
2
1
I/O 4
3
2
I/O 5
4
3
I/O 6
5
4
I/O 7
6
5
I/O 8
7
6
Table 21: Module Slots
i
The PS 01 power supply module is not configured.
CPU and COM are both on the F 60 CPU 01 module. In the programming tools,
however, they are represented as separated items.
4.3
Configuring the Module with SILworX
The SILworX Hardware Editor represents the modular HIMatrix F60 system as a subrack
with the following modules:
one processor module (CPU)
one communication module (COM)
i
Refer to the Safety Manual for the HIMatrix system for more details on how to configure the
processor module for safety-related operation.
Processor module system parameters such as
Fan State
,
Power Supply State
,
Temperature State
can be evaluated in the user program by assigning them to variables in
the SILworX Detail View for the HIMatrix F60, refer to the System Manual for the Modular
F60 System for more details.
Summary of Contents for 98 2200126
Page 34: ...9 Disposal CPU 01 Page 34 of 40 HI 800 189 E Rev 1 01...
Page 39: ......