HIMA 98 2200126, Manual, Page: 17 / 40

CPU 01 3 Product Description
HI 800 189 E Rev. 1.01 Page 17 of 40
3.4.3.3 Communication Indicators
Safe communication via safe
ethernet
is signaled by 2 small LEDs integrated in all RJ-45
connectors:
LED Color Status Description
On Full duplex operation
Blinking Collision
COL Green
Off Half duplex operation, no collision
On Connection available Tx Yellow
Blinking Interface activity
Table 7: Indicators for safe
ethernet
Communication
Additionally, D-sub connectors and 2 corresponding LEDs are available for indicating non
safe communication via fieldbuses:
LED Color Status Description
On RS485, fieldbus 1 is active FB1 Yellow
Blinking FB1 and FB2 blink simultaneously: Emergency loader is
active
On RS485, fieldbus 2 is active FB2 Yellow
Blinking FB2 and FB1 blink simultaneously: Emergency loader is
active
Table 8: Indicators for Fieldbus Communication
3.4.4 Operating System
The operating system loaded into the CPU contains all basic functions of the HIMatrix
programmable electronic system (PES), e.g.:
ƒ Reading the inputs and writing to the outputs
ƒ Processing the user program
ƒ Performing all test routines for hardware and software
ƒ Cycle time monitoring (watchdog)
ƒ Communication with other systems
For a description of the operating system functions and the variables used to configure the
systems and all modules, refer to the HIMatrix System Manual for the Modular F60 System.
3.4.5 User Program
The user program is created using one programming tool, SILworX or ELOP II Factory. It is
then translated into a machine code using the code generator and transferred to the flash
EPROM of CPU module.