![background image](http://html1.mh-extra.com/html/hilti/ud-4/ud-4_original-operating-instructions_2135514022.webp)
18
English
2180561
*2180561*
3.2
Intended use
The product described is an electric drill. It is designed for drilling in steel, wood and plastic.
3.3
Items supplied
Electric drill, operating instructions.
Other system products approved for use with this product can be found at your local
Hilti Store
or at:
www.hilti.group
| USA:
www.hilti.com
4
Technical data
4.1
Drill
For details of the rated voltage, frequency, current and input power, please refer to the power tool’s
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer’s power output must be twice
the rated power shown on the rating plate of the power tool. The operating voltage of the transformer or
generator must always be 5% and -15% of the rated voltage of the power tool.
UD 4
Weight
1.4 kg
Protection class
II
4.1.1 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise information
UD 4
Sound (power) level
96.5 dB
Sound pressure level
85.5 dB
Uncertainty
5 dB
Information about vibration
UD 4
Drilling (a
h
)
4 m/s²
Uncertainty (K)
1.5 m/s²
4.1.2 Using extension cords
WARNING
A damaged supply cord presents a hazard!
Do not touch the supply cord or extension cord if damaged
while working. Disconnect the supply cord plug from the power outlet.
▶
If the power tool’s supply cord is damaged it must be replaced with a specially-prepared and approved
supply cord available from Hilti Customer Service.
Printed: 25.06.2019 | Doc-Nr: PUB / 5367014 / 000 / 06