Hilti TE 50, User Manual

Page: 16 / 62

10 English 2102963
*2102963*
The chisel can be adjusted to 24 different positions (in 15° increments).
This ensures that flat chisels and shaped chisels can always be set to
the optimum working position.
1. Set the function selector switch to the “Chisel positioning” position .
2. Rotate the chisel to the desired position.
3. Turn the function selector switch until it engages in the “Chiseling”
position.
➥ The product is ready for use.
5.3.1 Chiseling 8
▶
Set the function selector switch to the “Chiseling” position .
5.3.2 Switching sustained operation on and off 9
When chiseling, the on/off switch can be locked in the “on” position.
1. Push the lockbutton for continuous operation forward.
2. Press the on/off switch as far as it will go.
➥ The product then runs in sustained operating mode.
3. Push the lockbutton for continuous operation back.
➥ The product switches off.
6 Detachable supply cord
6.1 Connecting the detachable supply cord
CAUTION
Risk of injury! Due to leakage current as a result of dirty contacts.
▶
Connect the detachable electric connector to the electric tool only when
it is clean and dry and when the supply cord is unplugged from the power
outlet.
1. Push the keyed, detachable electric plug connector into the socket as far
as it will go, until it is heard to engage.
2. Plug the supply cord into the power outlet.
6.2 Disconnecting the detachable supply cord
1. Unplug the supply cord from the power outlet.
2. Press the release button and pull the keyed, detachable electric plug
connector out of the socket.
3. Pull the supply cord connector out of the power tool.
Printed: 14.12.2018 | Doc-Nr: PUB / 5283567 / 000 / 03