Hilti SJT 6-A22, Original Operating Instructions

Page: 11 / 56

*2150257*
2150257 English 5
▶
Never position your hands ahead of or on the saw blade.
▶
Never cut into unknown materials and keep the line of cut above and below the workpiece free of
obstacles.
▶
Never reach or grip below the workpiece while cutting.
2.4 Battery use and care
▶
Observe the special regulations and instructions applicable to the transport, storage and use of Li-ion
batteries.
▶
Do not expose batteries to high temperatures, direct sunlight or fire.
▶
Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶
Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service .
▶
If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. In this case, always contact your Hilti Service .
3 Description
3.1 Product overview 1
@
On/off switch
;
Grip
=
Stroke rate regulator thumbwheel
%
Battery state of charge indicator
&
Battery release button
(
Battery
)
Air vents
+
Suction adapter
§
Catches
/
Cutting angle adjustment scale
:
Base plate
∙
Orbital-action adjustment lever
$
Saw blade
£
Contact guard
|
Guard
¡
Blade holder
Q
LED light
W
Saw blade release lever
E
Anti-splinter insert
3.2 Intended use
The product described is a hand-held cordless orbital-action jig saw. It is designed to be used for cutting
plastic, wood and metal as well as drywall board and gypsum fiberboard.
The product is equipped with a removable connector for an optional vacuum cleaner / dust removal hose.
This connector is designed to fit standard suction hoses. In order to connect the suction hose to the product,
use of a suitable adapter may be necessary.
▶
Use only Hilti Li­ion batteries of the B 22 series with this product.
▶
Use only Hilti battery chargers of the C4/36 series to charge these batteries.
▶
Use this product only with saw blades equipped with a T-shank.
Printed: 10.09.2019 | Doc-Nr: PUB / 5378777 / 000 / 01