Hilti SJT 6-A22, Original Operating Instructions

Page: 13 / 56

*2150257*
2150257 English 7
4 Orbital-action jig saw
SJT 6-A22
Rated voltage 21.6 V
Weight including B22⁄8.0 battery 7.1 lb
(3.2 kg)
Stroke length 1.1 in
(28 mm)
Stroke rate under no load (n
0
) 800 /min … 3,000 /min
Maximum cutting performance in wood 5.9 in
(150 mm)
Maximum cutting performance in aluminium 1.0 in
(25 mm)
Maximum cutting performance in unalloyed steel 0.4 in
(10 mm)
Cutting angle (left/right) 0° … 45°
Suction adapter outside diameter 1.08 in
(27.5 mm)
Storage temperature −4 ℉ … 158 ℉
(−20 ℃ … 70 ℃)
Ambient temperature for operation 1 ℉ … 140 ℉
(−17 ℃ … 60 ℃)
Battery charging starting temperature 14 ℉ … 113 ℉
(−10 ℃ … 45 ℃)
Storage temperature −4 ℉ … 104 ℉
(−20 ℃ … 40 ℃)
Ambient temperature for operation 1 ℉ … 140 ℉
(−17 ℃ … 60 ℃)
5 Preparations at the workplace
CAUTION
Risk of injury by inadvertent starting!
▶
Before inserting the battery, make sure that the product is switched off.
▶
Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery.
5.2 Inserting the battery
CAUTION
Risk of injury by short circuit or falling battery!
▶
Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶
Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the battery holder until it engages with an audible click.
3. Check that the battery is seated securely.
Printed: 10.09.2019 | Doc-Nr: PUB / 5378777 / 000 / 01