Hilti SJT 6-A22, Original Operating Instructions

Page: 15 / 56

*2150257*
2150257 English 9
5. Once the blade has penetrated right through the workpiece, bring the product into its normal working
position.
➥ The base plate then lies flat on the working surface.
6. Continue to saw along the cutting line.
6.4 Switching off
▶
To switch the tool off, slide the on/off switch back.
7 Removal
7.1 Removing the suction adapter 6
1. Press the two retaining catches inwards.
2. Pull the suction adapter away from the base plate toward the rear.
3. Pull the vacuum cleaner hose off the suction adapter.
7.2 Removing the guard 7
1. Remove the battery.
2. Tilt the guard slightly and pull it off toward the front.
7.3 Ejecting the saw blade 8
WARNING
Risk of injury. Uncontrolled ejection of the saw blade can lead to injury.
▶
When ejecting the saw blade, hold the product in such a way that it presents no risk of injury to persons
or animals.
1. Remove the battery.
2. Push the saw blade release lever to the side, as far as it will go.
➥ The saw blade will be released and ejected.
8 Care and maintenance
WARNING
Risk of injury with battery inserted !
▶
Always remove the battery before carrying out care and maintenance tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these can attack the plastic parts.
Care of the Li­ion batteries
• Keep the battery free from oil and grease.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these may attack the plastic parts.
• Avoid ingress of moisture.
Maintenance
• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
• Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired
immediately by Hilti Service.
• After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare parts and consumables. Spare
parts, consumables and accessories approved by Hilti for use with the product can be found at your
local Hilti Store or online at: www.hilti.group .
Printed: 10.09.2019 | Doc-Nr: PUB / 5378777 / 000 / 01