en
10
3.5 Power tool overloading and overheating indicator
The power tool is equipped with an electronic protection system to prevent
overloading and overheating. The power tool switches itself off automatically
in the event of overloading and overheating. After releasing the control
switch, the power tool may not restart immediately when the switch is
pressed again (while the power tool is cooling down).
LEDs light constantly
LEDs blink
Power tool status
-
LED 1, 2, 3, 4
Power tool over-
loaded or over-
heated
4 Technical data
Right of technical changes reserved.
Power tool
SF 18-A
SFH 18-A
Rated voltage (DC
voltage)
21.6 V
21.6 V
Weight of power tool
2.52 kg (5.56 lb)
2.58 kg (5.69 lb)
Dimensions (L x W x
H)
248 mm (9.76") x
92 mm (3.62") x
244 mm (9.61")
265 mm (10.43") x
92 mm (3.62") x
244 mm (9.61")
Speed in 1st gear
0…370/min
0…370/min
Speed in 2nd gear
0…1,250/min
0…1,250/min
Speed in 3rd gear
0…2,140/min
0…2,140/min
Torque with tool set
to drilling symbol
(soft/flexible joint)
Max. 50 Nm
(444 in/lbs)
Max. 50 Nm
(444 in/lbs)
Torque range (15 set-
tings)
2…12 Nm (12 in/lbs...
108 in/lbs)
2…12 Nm (12 in/lbs...
108 in/lbs)
Hammering speed
when drilling in 3rd
gear
39,000/min
Hammer drilling in
masonry (max. length
100 mm)
∅ 4…12 mm (¹⁄₈"...½")
Keyless chuck clamp-
ing range
∅ 1.5…13 mm
(¹⁄₁₆" to ½")
∅ 1.5…13 mm
(¹⁄₁₆" to ½")
Printed: 22.06.2015 | Doc-Nr: PUB / 5070676 / 000 / 04
Summary of Contents for SF(H) 18-A
