![background image](http://html.mh-extra.com/html/hilti/ps-38/ps-38_operating-instructions-manual_2136442017.webp)
Fault
Possible cause
Remedy
“Too fast” is shown in the
display.
The tool was moved too quickly.
Press the “Measure” button. Move
the tool slowly over the wall.
“Out of temperature range” is
shown in the display.
Temperature above permissible
range.
Wait until within the permissible
temperature range.
“Out of temperature range” is
shown in the display.
Temperature below permissible
range.
Wait until within the permissible
temperature range.
The display shows “Tool tem-
perature”
The temperature inside the tool has
changed too quickly.
Switch the tool on again.
“Strong radio signal detected”
is shown in the display.
Interference caused by radio signal.
The tool switches itself off auto-
matically.
If possible, eliminate the radio sig-
nal (e.g. WLAN, UMTS, aircraft
radar, transmitter mast or mi-
crowave device) and switch the
tool back on.
9. Disposal
Most of the materials from which Hilti tools or appliances are manufactured can be recycled. The materials must
be correctly separated before they can be recycled. In many countries, Hilti has already made arrangements
for taking back old tools or appliances for recycling. Ask Hilti Customer Service or your Hilti representative for
further information.
For EC countries only
Disposal of electrical appliances together with household waste is not permissible.
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment
and its implementation in accordance with national law, electrical appliances that have reached
the end of their life must be collected separately and returned to an environmentally compatible
recycling facility.
en
26
Summary of Contents for PS 38
Page 2: ...Menu 10 9 14 13 12 11 4 6 4 16 15 8 7 4 N U 1 2 3 4 4 5 1 ...
Page 4: ...A A B B 4 c b a 5 ...
Page 5: ...6 ...