![background image](http://html1.mh-extra.com/html/hilti/pp-25/pp-25_operating-instructions-manual_2135749019.webp)
ORIGINAL OPERATING INSTRUCTIONS
PP 10 / 25 pipe laser
It is essential that the operating instructions
are read before the tool is operated for the
first time.
Always keep these operating instructions to-
gether with the tool.
Ensure that the operating instructions are
with the tool when it is given to other persons.
Contents
Page
1 General information
14
2 Description
16
3 Accessories
16
4 Technical data
17
5 Safety instructions
18
6 Before use
19
7 Operation
20
8 Care and maintenance
23
9 Troubleshooting
24
10 Disposal
24
11 Manufacturer’s warranty - tools
25
12 FCC statement (applicable in US) / IC
statement (applicable in Canada)
25
13 EC declaration of conformity (original)
26
1
These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation “the tool”
always refers to the PP 10/25 pipe laser.
PP 10 / 25 pipe laser
1
@
Remote control signal receiving window
;
Warning / standby LED
=
Control panel
%
Display
&
Grip
(
Grip mount
)
PPA 84 cable connector
+
Battery compartment cover lock
§
PPA 82 battery incl. mains adaptor
/
Plumb spot
PP 10 / 25 pipe laser
:
Laser exit window
·
Remote control signal receiving window
$
Plumb spot
£
Pivot point mark
Control panel
|
Direction control / auto-centering button
¡
Plumb spot button
Q
Laser beam mode button
W
Remote control signal receiving window
E
“Lock” button
R
Target plate auto-centering button
T
Direction control / auto-centering button
Z
SET button
U
Laser beam up / down, value-entry button
I
Warning / standby LED
O
Laser beam up / down, value-entry button
P
ON / OFF button
PRA 20 remote control unit
2
@
Signal transmission aperture
;
Signal LED (blinks red when a signal is transmitted)
=
Target plate auto-centering button
%
Self-centering buttons (press both simultaneously)
&
Button to move target axis to the left
(
Button to move target axis to the right
)
ON / OFF button
+
Laser beam mode button
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
en
14
Printed: 15.11.2013 | Doc-Nr: PUB / 5070160 / 000 / 01