![background image](http://html1.mh-extra.com/html/hilti/pp-25/pp-25_operating-instructions-manual_2135749020.webp)
CLASS IIIa LASER PRODUCT
675-695nm < 5mW max.
LASER RADIATION - AVOID DIRECT
EYE EXPOSURE
DANGER
CLASS IIIa LASER PRODUCT
520-550nm < 5mW max.
LASER RADIATION - AVOID DIRECT
EYE EXPOSURE
DANGER
3R
CLASS IIIa LASER PRODUCT
620-690nm < 5mW max.
LASER RADIATION - AVOID DIRECT
EYE EXPOSURE
3R
319789
PP 10
Made in Japan
Hilti= registered trademark of the Hilti Corporation, Schaan, Liechtenstein
Power: 6.0V=nom./250 mA
EN 60825-1:2003
This Laser Product
complies with 21CFR
1040 as applicable
DANGER
AVOID EXPOSURE
LASER LIGHT IS EMITTED
FROM THIS APERTURE
Item No.: 319781
Date .:
CLASS IIIa LASER PRODUCT
520-550nm < 5mW max.
LASER RADIATION - AVOID DIRECT
EYE EXPOSURE
3R
419342
Power: 6.0V=nom./250 mA
EN 60825-1:2008
This Laser Product
complies with 21CFR
1040 as applicable
DANGER
Item No.: 419291
Date .:
PP 25
02
Hilti= trademark of the Hilti Corporation, Schaan, LI
Made in Japan
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Symbols
Read the
operating
instructions
before use.
Return waste
material for
recycling.
On the tool
Do not stare into the beam.
Laser warning plates for the USA in accordance with CFR
21 § 1040 (FDA).
On the tool
Do not stare into the beam.
Laser warning plates for the USA in accordance with CFR
21 § 1040 (FDA).
On the tool
Laser warning plate in accordance with IEC825 /
EN60825-1:2003
Type identification plate
PP 10
Type identification plate
PP 25
Location of identification data on the tool
The type designation and serial number can be found on
the type identification plate on the tool. Make a note of
this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative
or service department.
Type:
Generation: 01
Serial no.:
en
15
Printed: 15.11.2013 | Doc-Nr: PUB / 5070160 / 000 / 01