6
3. Tools and accessories
3.3 PDAW 80-1 mains adaptor
The mains adaptor is an integral part of the
charging kit. It is equipped with a two pin
plug. The mains adaptor transforms the
power supply from alternating current to
direct current which is used to charge the
batteries. The mains adaptor automatically
adjusts itself to suit an AC voltage between
100 - 240 V and 50 - 60 Hz. The mains
adaptor has been specially designed to
supply current to the charging adaptor.
- NOTE -
Battery chargers or mains adaptors with
other voltage outputs, such as those for
mobile phones, may not be used. Use of
other battery chargers or mains adaptors
may damage the range meter.
3.4 PDAW 80/81-2 car battery plug
The car battery plug is an integral part of
the PDA 80/81 charging kit. It can be
inserted into a vehicle cigarette lighter or
into sockets of the same design. This
adaptor has a special design and
transforms the 12 - 24 V direct current of
a vehicle battery into a voltage suitable for
the charging adaptor.
A light-emitting diode (LED) is
incorporated in the adaptor to indicate
correct connection for charging. An
additionalfuse in the adapters front section
provides protection against voltage peaks.
- NOTE -
As the car battery plug has been especially
designed to charge the NiMH batteries of
the PD 32, it may not be replaced by other
types of car battery plugs.
3.5 PDAW 80/81-1 charging adaptor
The respective mains adaptor supplies
current to the charging adaptor. Prior to
charging the battery, the side flange
connections should be carefully checked.
3.6 PDAW 80/81-3 battery pack
The battery pack consists of two
rechargeable, 1.2-V NiMH cells with a
capacity of approx.1800 mAh. The battery
pack remains in the battery compartment
while being charged.
- NOTE -
– A "memory effect" is virtually
non-existent with this type of batteries
and the charging process used.
The charging process can be interrupted
at any time without damaging the
battery cells.
– Other brands of rechargeable batteries
can be used. It must be ensured,
however, that, as far as possible,
batteries have a similar capacity of
approx. 1800 mAh.
3.7 PDAW 81-1 mains adaptor
This mains adaptor PDAW 81-1 is virtually
identical to the PDAW 80-1 mains adaptor.
The only difference is the type of mains
plugs which are interchangeable plugs.
3.8 PUA 60 laser visibility glasses
The laser visibility glasses clearly improve
the visibility of the laser beam (spot)
3.9 Belt clip PDA 62
The belt clip is made from durable plastics
and is quickly and easily fixed to the belt
using the snapper. For carrying the range
meter snaps into position and easily
detaches when being needed.
3.10. Measuring extension PDA 70
The measuring extension is made from alu-
minium and durable plastic handle.
With the help of the belt clip the range
meter attaches to the measuring extension.
The rear reference extends by 1.270 m /
50 inches. Please also refer to
chapter
7.Operation
for more explanations how to
change the reference setting to use the
measuring extension.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070013 / 000 / 00
