![background image](http://html1.mh-extra.com/html/hilti/pd-32/pd-32_operating-instructions-manual_2135807030.webp)
27
9. Calibration and adjustment / 10. Care and maintenance
9.2 Adjustment
For optimized adjustment, have the laser
range meter adjusted at a Hilti workshop
where accurate adjustment of the range
meter will be confirmed with a calibration
certificate.
9.3 Hilti calibration service
We recommend that you undertake a
regular check of the laser range meter
through the Hilti calibration service in order
to verify its reliability in accordance with
standards and legal requirements.
The Hilti calibration service is available at
all times, but a check at least once a year
is recommended.
As a part of the Hilti calibration service, it
is verified that on the day of the check the
specifications of the range meter comply
with the technical information given in the
operating instructions.
If there are deviations from the manufac-
turer's information, the range meter will
be re-adjusted. After the check and
adjustment, a calibration sticker will be
applied to the range meter, and it will be
verified in writing in a calibration certificate
that the range meter functions in
compliance with the manufacturer's
information.
Calibration certificates are always required
for companies that have been certified
according to ISO 900X...
Your local Hilti contact / representative will
be pleased to provide further information.
10. Care and maintenance
10.1 Cleaning and drying
– Blow dust off the lens.
– Do not touch the lens with your fingers.
– Use only a clean, soft cloth for cleaning.
If necessary, slightly moisten the cloths
with pure alcohol or a little water.
- NOTE -
– Do not use any other liquids as these
might damage the plastic parts.
– Observe the temperature limits when
storing your equipment. This is particu-
larly important in winter or summer,
especially if the equipment is kept inside
a vehicle (storage temperatures: -30°C
to +70°C / -22°F to +158°F).
– Replace damaged parts.
10.2 Storage
– Remove the range meter from its case if
it has become wet. Clean the range
meter, carrying case and accessories.
Re-pack the equipment only when it is
completely dry.
– Check the accuracy of the equipment
before it is used after a long period of
storage or transportation.
– Remove the batteries if the range meter
is not going to be used for a consider-
able time. The range meter can be
damaged by leaking batteries.
10.3 Transportation
Use either the original Hilti cardboard box
the tool was delivered in or packaging of
equivalent quality for transporting or ship-
ping your equipment.
- NOTE -
Always remove the batteries before
shipment.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070013 / 000 / 00