![background image](http://html1.mh-extra.com/html/hilti/dx-351-bt/dx-351-bt_operating-instructions-manual_2135891033.webp)
28
en
13. Confirmation of CIP testing
The Hilti DX 351 BT and DX 351 BTG have been system
and type tested. As a result, the tools bear the square-
shaped PTB approval mark showing approval number
S 807
. In this way, Hilti guarantees compliance with the
approved type.
Unacceptable/inadmissible defects, deficiencies, etc.
that are determined during use of the tool must be report-
ed to the manager responsible at the approval authori-
ty (PTB) and to the Office of the Permanent International
Commission (C.I.P.).
14. Health and safety of the user
Noise information
The following table provides noise measurement information:
Powder-actuated tool
Type:
DX 351-BT / DX 351 BTG
Model:
Serial production
Caliber: 6.8/11
brown
Power setting:
3
Application:
Fastening of X-BT M10-24-6 onto pre-drilled steel
platting 8 mm thick
Declared measured values of noise characteristics according to 2006/42/EC Machinery Directive in
conjunction with E DIN EN 15895
Noise (power) level:
L
WA, 1s
1
109 dB(A)
Emission noise-pressure level in the work station:
L
pA, 1s
2
105 dB(A)
Peak sound pressure emission level:
L
pC, peak
3
136 dB(C)
Operation and set-up conditions:
Set-up and operation of the pin driver in accordance with E DIN EN 15895-1 in the semi-anechoic test room of
Mu
̈
ller-BBM GmbH. The ambient conditions in the test room conform to DIN EN ISO 3745.
Testing procedure:
Enveloping surface method in anechoic room on reflective surface area in accordance with E DIN EN 15895, DIN
EN ISO 3745 and DIN EN ISO 11201.
NOTE: The noise emissions measured and the associated measurement uncertainty represent the upper limit for
the noise values to be expected during the measurements.
Variations in operating conditions may cause deviations from these emission values.
1
± 2 dB (A)
2
± 2 dB (A)
3
± 2 dB (C)
Vibration
The declared total vibration value according to 2006/42/EC does not exceed 2.5 m/s
2
.
Further information regarding the health and safety of the user can be found at the Hilti web site: www.hilti.com/hse
Printed: 20.08.2013 | Doc-Nr: PUB / 5069824 / 000 / 02
Summary of Contents for DX 351 BT
