46
English
2328430
*2328430*
Trouble or fault
Possible cause
Action to be taken
The saw blade is
jammed in the kerf and
the saw doesn’t start.
A piece of steel cut free is
jammed in the kerf.
▶
Try to lift the saw blade
out of the kerf by alter-
nately moving the saw
head forward and back
(advance / return). Try to
start the blade drive as
soon as the blade can be
moved freely.
Caution!
Avoid use of excessive
force as this could result
in damage.
▶
If the saw blade can’t
be moved: Disconnect
the saw blade from the
saw and use a breaker
/ jackhammer to chisel
away concrete until the
blade is free.
The part cut free is pressing
against the saw blade.
▶
Disconnect the saw blade
from the saw.
▶
Remove the part that has
been cut free.
Saw blade slips
Tightening torque too low
▶
Grease the thread of
the clamping screw and
tighten the clamping
screw to the specified
torque.
Clamping faces of flange
and saw blade dirty or oily
▶
Clean and degrease the
clamping surfaces.
Threads of clamping screw
and inner flange dirty or
damaged
▶
Clean and check the
threads of clamping screw
and inner flange.
Thread of the clamping
screw is stiff
▶
Grease the thread of the
clamping screw.
13
Disposal
Most of the materials from which
Hilti
products are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries,
your old tools, machines or appliances can be returned to
Hilti
for recycling. Ask
Hilti
Service or your Hilti sales representative for further information.
Drilling and sawing slurry
Disposing of drilling and sawing slurry directly into rivers, lakes or the sewerage system
without suitable pretreatment is problematic from an environmental point of view.
▶
Ask the local public authorities for information about current regulations.
We recommend the following pretreatment:
▶
Collect the drilling or sawing slurry (for example, using a wet-type vacuum cleaner).
▶
Allow the drilling or sawing slurry to stand for some time or add a flocculation agent
to help the fine particles in the slurry settle and separate from the water.
Summary of Contents for DST 20-CA
