![background image](http://html1.mh-extra.com/html/hilti/ds-ws10/ds-ws10_operating-instructions-manual_2136339006.webp)
3
5
4
1
2
5
6
7
6
Use of the equipment as directed
■
The DS-WS10(-E) wire saw has been designed for
the technical demolition of steel, concrete, stone or
brickwork structures in construction and civil engi-
neering applications. Use of the saw for other appli-
cations is considered to be “not as directed” and
requires prior approval by the manufacturer.
■
The operator in charge must be aware of the possi-
ble dangers and of his responsibility for safety, both
with regard to himself and to others. The operator is
responsible for securing the danger area by cordon-
ing the area off and installing the appropriate pro-
tective equipment.
■
The wire saw is designed for a maximum cutting
length of 2 meters. The maximum distance between
the pivoting pulleys at the machine and the wire entry
or exit point must not exceed 3.5 meters.
■
The wire saw may be operated only by specialists
trained in concrete cutting techniques, referred to in
the following as “operators”. These persons must be
familiar with the content of these operating instruc-
tions and must have been trained in their safe appli-
cation by a Hilti specialist.
■
National regulations and legislation as well as the
information in the operating instructions and safety
precautions concerning the saw and its accessories
(sawing wire, fastening accessories, lifting equip-
ment, compressor, hydraulic power unit etc.) must
be observed.
■
Do not use the saw to cut loose objects or objects
held against the wire by hand.
■
Use of the wire saw or its components for purposes
other than wire sawing is prohibited, i.e. use as a
transport or conveyance device is not permissible.
■
The machine is suitable for wet and dry cutting. A
vacuum dust removal system must be used when
dry wire sawing. Special dust removal hoods are
available on request.
■
The equipment may be lifted by crane only at the lift-
ing points provided.
■
Do not cut materials which, as a result of the cutting
process, may produce toxic, hazardous or explosive
dust or vapors.
■
Do not cut easily combustible aluminum or magne-
sium alloys.
2.1
2. Description
Components
2.2
Base plate
Guide rail and advance unit
Pivoting pulley crossbar
Hydraulic drive unit (DS WS10) or electric drive unit
(DS WS10-E)
Guard
Wire storage extension
End stop
Printed: 08.07.2013 | Doc-Nr: PUB / 5069736 / 000 / 01
Summary of Contents for DS WS10
