![background image](http://html1.mh-extra.com/html/hilti/ds-ws10/ds-ws10_operating-instructions-manual_2136339042.webp)
3
7. Setting up the saw system
Piston rod securing lever
Release the return lock
, slide the piston rod all the
way in and then lock the piston rod
and return lock
in position.
Return lock
The return lock prevents slackness of the sawing wire
due to resilience of the piston rod when starting the saw.
The advance movement locking lever
can be released
after tightening the return lock.
CAUTION
Release the advance movement locking lever and the
piston rod clamp only after ensuring that the advance
cylinder is not under pressure.
Fitting the guards
7.10
Bring the guard into position.
Secure the guard with the spring pin.
CAUTION
Do not, under any circumstances, operate the saw with-
out correctly and securely fitted guards and end stop.
CAUTION
The long guard must be fitted when the wire storage
extension is in use.
42
2
3
Printed: 08.07.2013 | Doc-Nr: PUB / 5069736 / 000 / 01
Summary of Contents for DS WS10
