![background image](http://html1.mh-extra.com/html/hilti/ds-ws10/ds-ws10_operating-instructions-manual_2136339059.webp)
10. Troubleshooting
Troubleshooting
10.1
The drive pulley / sawing wire doesn’t begin to rotate
60
10.2
The drive pulley slips / the wire is not driven
60
10.3
The wire jumps off the drive pulley or guide pulley
when starting
60
10.4
Little or no sawing progress
60
10.5
The diamond wire wears too quickly
60
10.6
The sawing wire wears unevenly / one-sided
61
10.7
The diamond wire collapses / beads are pushed together
61
10.8
The wire is pulled out of the crimped connector
61
10.9
The wire breaks immediately before or after the connector
61
10.10 The wire begins to vibrate strongly during sawing
61
10.11 The air compressor doesn’t start
62
10.12 The air compressor can’t build up pressure
62
10.13 Drive pulley speed begins to fluctuate rapidly (audible)
(DS-WS10)
62
10.14 Machine doesn’t start, green “ready” indicator lamp
doesn’t light (DS WS10-E)
62
10.15 Machine doesn’t start, green “ready” and red “fault”
indicator lamps light (DS WS10-E
62
10.16 Machine doesn’t start although green “ready” indicator lamp
lights (DS WS10-E)
62
10.17 No power at the 230V power outlet (DS WS10-E)
62
10.18 Current input is too high when idling and sawing (DS WS10-E) 63
10.19 The service indicator lights and the drive unit
may be inoperative (DS WS10-E)
63
10.20 The ground fault circuit interrupter has been tripped
63
59
Printed: 08.07.2013 | Doc-Nr: PUB / 5069736 / 000 / 01
Summary of Contents for DS WS10
