Hilti DS WS10, Operating Instructions Manual

Page: 16 / 68

Pulley stand (optional)
In applications where, due to restricted access, it is
impossible to mount the compact wire saw directly on
the object to be cut or where longer cuts of up to a max-
imum of 2 meters are to be made, the sawing wire is
guided to the cutting face by the pulley stand.
3.3
Release pulley
The release pulley is used to reduce the length of wire
in contact or to increase the radius of the arc followed
by the wire (avoiding a tight radius) at the rear of the
object to be cut.
3.4
Wire storage extension (optional)
The wire storage extension can be used to increase wire
storage capacity from 250 cm to 500 cm.
3.2
Wire guards (optional)
3.5
Wire guards must be fitted in situations where it can-
not be ensured that persons do not enter the danger
area while the equipment is in operation, i.e. the area
in which flying fragments etc. present a risk of injury,
or in situations where there is a risk of damage to prop-
erty or other equipment within this area. When wire
guards are used, check to ensure they are fitted cor-
rectly.
3. Accessories
16
Printed: 08.07.2013 | Doc-Nr: PUB / 5069736 / 000 / 01