![background image](http://html1.mh-extra.com/html/hilti/d-lp-32/d-lp-32_operating-instructions-manual_2135192015.webp)
15
3. System components, tools and accessories
Recommendations for use: Which specification for which material?
Diamond saw blades
We recommend Hilti CS-H, CM-H or CH-H saw blades
for use with the D-LP 32/DS-TS 32. The saw blades can
be selected from the following table, taking material,
steel content and dimensions into account.
3.5
Important
■
Sawing at a lower speed (reduced saw blade r.p.m.) is usually advantageous when difficult conditions such as
high steel content or hard aggregates etc. are encountered.
■
Safety precaution: Keep to the recommended settings in order to ensure that blade peripheral speed remains
within the safe range for the saw blade used.
DS-FCA-110 flush-cutting flange
3.4
Specification
Cutting characteristics
Type of concrete
Reinforcement
CS-H / UP
Fast-cutting
Soft aggregates
Normal to high
CM-H / UP
Well-balanced, good speed and life
Hard aggregates
Normal
CH-H / SP
Fast-cutting and long life
Soft to very hard aggregates
Normal to high
Printed: 08.07.2013 | Doc-Nr: PUB / 5069667 / 000 / 01
Summary of Contents for D-LP 32
