![background image](http://html.mh-extra.com/html/hilti/ag-500-a18/ag-500-a18_operating-instructions-manual_2135594006.webp)
Obligation signs
Wear eye
protection
Wear a hard
hat
Wear ear
protection
Wear
protective
gloves
Wear
breathing
protection
Symbols
Read the
operating
instructions
before use
Return waste
material for
recycling.
Volts
Direct current
Rated speed
Revolutions
per minute
Revolutions
per minute
Diameter
Location of identification data on the power tool
The type designation and serial number can be found
on the type identification plate on the machine or tool.
Make a note of this data in your operating instructions
and always refer to it when making an enquiry to your
Hilti representative or service department.
Type:
Generation: 01
Serial no.:
2. Description
2.1 Use of the product as directed
The power tool is designed for cutting, grinding and brushing metal or mineral materials (concrete, stone,
etc.) without use of water.
The working environment may be as follows: construction site, workshop, renovation, conversion or new
construction.
Do not use the battery as a power source for other unspecified appliances.
Working with metals: Cutting, rough grinding, fine grinding, brushing
Working with mineral materials: Cutting, slitting using the corresponding guard (DC
‑
EX 125/5"-C), grinding
using the corresponding guard (DG
‑
EX 125/5").
Use only grinding discs, cutting discs and other accessories that are approved for use at a speed of at least
11000 /min at max. 5" diameter.
Use only synthetic resin-bonded, fiber-reinforced grinding or cutting discs or diamond cutting discs approved
for use at a peripheral speed of 80 m/sec.
The power tool may be used only for dry cutting or grinding.
Cutting or grinding materials containing asbestos is not permissible.
When grinding stone, a vacuum cleaner equipped with the appropriate filter, e.g. a suitable Hilti vacuum
cleaner, must be used.
Modification of the power tool or tampering with its parts is not permissible.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
en
2
Summary of Contents for AG 500-A18
Page 3: ...2 3 4 6 5 ...
Page 4: ... 7 ꙣ Ꙥ 9 8 ...