![background image](http://html.mh-extra.com/html/hilti/ag-125-7se/ag-125-7se_original-operating-instructions_2135560035.webp)
English
27
Trouble or fault
Possible cause
Action to be taken
The tool doesn’t start.
Interruption in the electric supply.
▶
Plug in another power tool or
appliance and check whether it
works.
The supply cord or plug is defec-
tive.
▶
Remove the supply cord.
→ page 25
▶
Fit the supply cord. → page 26
The carbon brushes are worn.
▶
Replace the carbon brushes.
→ page 26
The tool doesn’t work.
The tool has been overloaded.
▶
Release the on/off switch and
then press it again. Then allow
the power tool to run under no
load for approx. 30 seconds.
The tool does not achieve full
power.
The extension cord conductor
cross section (gauge) is inade-
quate.
▶
Use an extension cord with
an adequate conductor cross
section.
10 Disposal
Most of the materials from which
Hilti
tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to
Hilti
for recycling. Ask
Hilti
Service or your Hilti representative
for further information.
▶
Disposal of electric tools or appliances together with household waste is not permissible.
11 Manufacturer’s warranty
▶
Please contact your local
Hilti
representative if you have questions about the warranty conditions.
Printed: 08.09.2017 | Doc-Nr: PUB / 5373395 / 000 / 00
Summary of Contents for AG 125-7SE
