Hilti AG 125-7SE, Original Operating Instructions

Page: 30 / 284

22 English
If the device is powered by a generator or transformer, the generator or transformer’s power output must be
at least twice the rated input power shown on the type identification plate of the device. The operating voltage
of the transformer or generator must always be 5% and -15% of the rated voltage of the device.
AG 125-7SE AG 125-8SE
Rated power input
710 W 800 W
Rated speed 11,500 /min 11,500 /min
Maximum disc diameter 125 mm 125 mm
Thread diameter M14 M14
Thread length 22 mm 22 mm
Weight in accordance with EPTA procedure 01 2.0 kg 2.0 kg
5.2 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise emission values
AG 125-7SE AG 125-8SE
Sound power level (L
WA
) 96.3 dB(A) 96.3 dB(A)
Uncertainty for the sound power level (K
WA
) 3 dB(A) 3 dB(A)
Emission sound pressure level (L
pA
) 85.3 dB(A) 85.3 dB(A)
Uncertainty for the sound pressure level (K
pA
) 3 dB(A) 3 dB(A)
Total vibration
AG 125-7SE AG 125-8SE
Surface grinding with the vibration-absorbing
side handle (a
h,AG
)
4.8 m/s² 4.8 m/s²
Sanding (a
h,DS
) 3.6 m/s² 3.6 m/s²
Uncertainty (K) 1.5 m/s² 1.5 m/s²
6 Operation
6.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶
Unplug the supply cord before making adjustments to the power tool or before changing
accessories.
Observe the safety instructions and warnings in this documentation and on the product.
6.2 Fitting the side handle
▶
Screw the side handle into one of the threaded bushings provided.
Printed: 08.09.2017 | Doc-Nr: PUB / 5373395 / 000 / 00