![background image](http://html.mh-extra.com/html/hilti/ag-100-7-d/ag-100-7-d_operation-manual_2135548013.webp)
English
11
Item Equipment
ACD
AG-D
AF-D
AN-D
DGCW
DCD
B
Front cover (in combination
with A)
X
—
—
—
—
—
C
DG-EX 100/4" or
DG-EX 115/4.5" hood for
surface grinding
—
—
—
—
X
—
D
DC-EX 100/4" compact hood
or DC-EX 115/4.5" C (in con-
junction with A)
—
—
—
—
—
X
E
Side handle
X
X
X
X
X
X
F
Clamping nut
X
X
X
X
X
X
G
Clamping flange
X
X
X
X
X
X
5 Technical data
5.1 Angle grinder
Note
When powered by a generator or transformer, the generator or transformer’s power output must be at
least twice the rated input power shown on the rating plate of the power tool. The operating voltage of
the transformer or generator must always be 5% and -15% of the rated voltage of the power
tool.
The information given applies to a rated voltage of 230 V. The data may vary in the event of deviations
from the rated voltage and for country-specific versions. Please refer to the power tool’s type
identification plate for details of its voltage, frequency, current and input power ratings.
AG 100-7 S/
AG 115-7 S
AG 100-7 D/
AG 115-7 D
AG 100-8 S/
AG 115-8 S
AG 100-8 D/
AG 115-8 D
Rated power
input
720 W
700 W
850 W
850 W
Rated speed
11,500 /min
11,500 /min
11,500 /min
11,500 /min
5.2 Further information
AG 100-7 S/D, AG 100-8 S/D
AG 115-7 S/D, AG 115-8 S/D
Maximum disc diameter
100 mm
115 mm
Thread diameter
M10
M14
Thread length
11 mm
15 mm
Weight in accordance with
EPTA procedure 01/2003
1.9 kg
2.0 kg
5.3 Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions have been measured in accordance with
a standardized test and may be used to compare one power tool with another. They may be used for a
preliminary assessment of exposure.
The data given represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools or is poorly maintained, the data may vary. This may
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the power tool is switched
off, or when it is running but not actually being used for a job. This may significantly reduce exposure over
the total working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: Maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Printed: 20.07.2017 | Doc-Nr: PUB / 5169257 / 000 / 05
Summary of Contents for AG 100-7 D
