Hilti AG 100-7 D, Operation Manual

Page: 11 / 24

English 9
@
Arbor lockbutton
;
Steadying rib
=
On/off switch
%
Side handle
&
Wrench
(
Clamping nut
)
Abrasive cutting disc / abrasive grinding
disc
+
Clamping flange
§
Standard guard
/
Clamping lever
:
Adjusting screw
∙
Arbor
$
Keyed locating lug
£
Threaded bushing for handle
|
Switch-on interlock release button
¡
On/off switch with dead-man function
3.2 Intended use
The product described is a hand-held electric angle grinder. It is designed for cutting and grinding metal and
mineral materials without use of water. It may used only for dry cutting / grinding.
The tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its rating plate.
• The power tool may be used for cutting, slitting and grinding mineral materials only when equipped with
the corresponding guard (optional accessory).
• It is recommended that a dust removal system consisting of matched components, i.e. dust removal
hood and a suitable Hilti vacuum cleaner, are used for working on mineral materials such as concrete or
stone. These protect the operator and increase the life of the power tool and accessory tools used.
3.3 Items supplied
Angle grinder, side handle, standard guard, front cover, clamping flange, clamping nut, wrench, operating
instructions.
You can find other system products approved for your product at your local Hilti Center or online at:
www.hilti.group
3.4 Restart interlock
The power tool does not restart by itself when the on/off switch is locked in the on-position and the power
returns after an interruption in the electric supply. The on/off switch must first be released and then pressed
again to restart.
3.5 DG-EX 100/4" or DG-EX 115/4.5" (accessory) dust hood for grinding
The grinding system is suitable only for occasional use with diamond cup wheels for grinding mineral
materials.
CAUTION Use of this hood for working on metal is prohibited.
Printed: 20.07.2017 | Doc-Nr: PUB / 5169257 / 000 / 05