Hilti AG 100-7 D, Operation Manual

Page: 12 / 24

10 English
3.6 DC-EX 100/4" C dust hood for cutting or DC-EX 115/4,5" C compact hood (accessory)
Use the compact hood when cutting masonry and concrete.
CAUTION Use of this hood for working on metal is prohibited.
3.7 Front cover for the disc guard
When grinding with straight grinding discs and cutting with cutting discs in metalworking applications,
use the standard guard with front cover.
4 Consumables
Use only synthetic-resin-bonded, fiber-reinforced discs with a maximum Ø of 100 mm or max. Ø of 115 mm,
which are approved for a rotational speed of at least 11500/min and a peripheral speed of 80 m/s.
The maximum grinding disc thickness is 6.4 mm and the maximum cutting disc thickness is 2.5 mm.
WARNING! When cutting or slitting with abrasive cutting discs always use the standard guard with
the additional front cover, or a fully enclosing dust hood.
Discs
Application Designation Material
Abrasive cutting disc Cutting, slitting AC­D Metal
Diamond cutting disc Cutting, slitting DC­D Mineral
Abrasive grinding disc Rough grinding AG­D, AF­D, AN­D Metal
Diamond grinding disc Rough grinding DG­CW Mineral
Suitability of discs for the equipment used
Item Equipment AC­D AG-D AF-D AN-D DG­CW DC­D
A Guard X X X X — X
Printed: 20.07.2017 | Doc-Nr: PUB / 5169257 / 000 / 05