hilscher 1912.102, User Manual

Page: 60 / 146

Configuration 60/146
Parameter Description Value, Value range
Port ID of wireless IO-Link port to which the IO-Link Device is
to be paired.
Note: For a device featuring “Double slot” an even port
must be assigned.
Otherwise the error message appears: “
Pairing
failed HTTP Error 500:NetProxy returned
with an error: C0000124
”
If a port is not shown in the selection list, you can use
the Remove option (see section
Pairing [
}
page 70]).
WP01 … WP16
Pairing A pairing service is provided to pair a found IO-Link
Device to a wireless IO-Link port of the IO-Link Wireless
Master. Pair (green), Unpair (red),
Default: Pair (green)
Table 32: Scan result, pairing
The scan result includes a textual description: “
Scan finished:
[ number of found devices ]
device(s) found
”. For scan errors appears:
“
Scan failed HTTP Error
[ error number ]: [ short description of error ]”
plus a further message in the upper part of the scan tab.
Pairing / unpairing
For pairing an IO-Link Device to a wireless IO-Link port of the IO-Link
Wireless Master device during device commissioning:
Ø
In the Scan tab in the scan result, select the Port .
Ø
Click .
Ê Pairing is performed and “Pair” (green) switches to “Unpair” (red). The
message
Pairing succeeded
appears.
You can change made pairing setting as follows:
Ø To unpair an IO-Link Device and a paired wireless IO-Link port, click
. The message
Unpairing succeeded
appears.
For further information, refer to Configuring the IO-Link Wireless
Master [
}
page 83].
NFD-3090-PNS-IOLM\W | Hardware, installation and commissioning
DOC201101UM03EN | Revision 3 | English | 2022-02 | Released | Public © Hilscher 2020 - 2022