Configuration
26/146
Not recommended tool chain
If you use the Expert GSDML, then the use of the netFIELD Wireless Web
Server or the IO-Link E.T. to set the IO-Link Wireless Master parameters or
the wireless port parameters is not recommended.
In case you use the netFIELD Wireless Web Server or the IO-Link E.T. to
configure the IO-Link Wireless Master parameters or the wireless port
parameters, then the PROFINET IO-Controller overwrites these
parameters.
Note:
Each time the PROFINET IO communication starts, the PROFINET
IO-Controller transmits the configuration and parameters to the
NFD-3090-PNS-IOLM\W device. Parameters for the IO-Link
Wireless Master or the wireless ports, which have been set by using
the netFIELD Wireless Web Server or the IO-Link E.T., will be
overwritten. The parameters set via the PROFINET IO-Controller
have priority.
If you want to change parameters for the IO-Link Wireless Master or the
wireless ports permanently, set them with the configuration software of the
PROFINET IO-Controller.
NFD-3090-PNS-IOLM\W | Hardware, installation and commissioning
DOC201101UM03EN | Revision 3 | English | 2022-02 | Released | Public
© Hilscher 2020 - 2022
