Hillrom Breathe LIFE2000, Instructions For Use Manual, Page: 68 / 82

127 128
BATTERY INFORMATION 9 BATTERY INFORMATION 9
COMPRESSOR BATTERY SPECIFICATIONS
SPECIFICATION DESCRIPTION
Type Lithium ion, rechargeable, not user replaceable.
Ampere/hour rating 10200 mAh
Maximum current 10 A
Operating Voltage 28.8 V internal
Duration 1 hour
Compressor If the battery performance degrades to unacceptable levels, contact your service
representative.
NOTE:
The compressor contains a lithium ion battery. Before shipping or traveling with the compressor, contact
your transportation carrier for information.
TIPS:
• A fully charged battery in good condition is designed to operate for one hour of typical use, but exact
operating time depends on usage conditions.
• If the battery has no charge, it takes approximately three to four hours to fully recharge.
• A fully charged battery in good condition lasts one hour.
• The compressor can be used while charging.
• The compressor sounds an alarm when the battery charge drops to 20% or less.
WHEN THE COMPRESSOR IS CONNECTED TO AC POWER
When the compressor is powered on and connected to AC power, the indicator lights surrounding the
compressor’s power button are illuminated in green.
TIP:
When the compressor’s internal battery is charging, the blinking indicator light ( ) shows the current level of
charge.
BATTERY
CHARGE
SCALE
0 100% 0 100% 0 100% 0 100% 0 100% 0 100%
APPROX.
CHARGE
AMOUNT
0 – 20% 21 – 50% 51 – 70% 71 – 90% 91 – 99% 100%
VENTILATOR BATTERY CHARGER AND POWER CORD SPECIFICATIONS
VENTILATOR BATTERY CHARGER SPECIFICATIONS
CATEGORY SPECIFICATION
Input AC voltage 100-240 VAC
Input AC frequency 50-60 Hz
Input AC current 0.3 A max.
Output DC voltage 8.4 VDC
Output DC current 1.3 A
Insulation class Class II
Electrical safety approvals UL 60601-1, EN 60950, EN 60601-1, EN 60335-2-29
Dimensions
3.55” x 1.77” x 1.26” (90 x 45 x 32 mm)
Weight 0.25 lb. (0.115 kg)
VENTILATOR POWER CORD SPECIFICATIONS
6 ft. IEC 320-E7 compliant cord
COMPRESSOR POWER SUPPLY AND POWER CORD SPECIFICATIONS
COMPRESSOR POWER SUPPLY SPECIFICATIONS
CATEGORY SPECIFICATION
Input AC voltage 100-240 VAC
Input AC frequency 50-60 Hz
Input AC current 5 A max. at 100 VAC
2.5 A max. at 240 VAC
Output DC voltage 24 VDC
Output DC current 12.5 A
Insulation class Class II
Ingress protection rating IP22
Electrical safety approvals ANSI/AAMI ES60601-1, cUL ES60601-1, TUV EN60601-1 3rd edition
Dimensions
7.8” x 4” x 2” (198 x 102 x 51 mm)
Weight 3 lb. (1.36 kg)
COMPRESSOR POWER CORD SPECIFICATIONS
6 ft. IEC 320-C13 compliant cord