73
74
VENTILATION SETTINGS
6
VENTILATION SETTINGS
6
SETTING AUDIO LOUDNESS
WARNING:
Ensure that the alarm loudness is set above the loudness of your surroundings.
On the
Utilities Menu
screen, touch
Set Loudness
.
Touch the
Up
arrow to increase the audio loudness level or the
Down
arrow
to decrease it. Pressing and holding an arrow button will continue to increase
or decrease the value.
You can choose a loudness level between 1 and 5, with 5 being the loudest
and 1 the quietest.
When you are finished, touch
OK
.
In the message asking if the settings are
OK
, touch
CONFIRM
.
NOTE:
Changes to settings only take effect when you touch
CONFIRM
.
LOUDNESS SETTINGS SUMMARY
DEFAULT
MINIMUM
MAXIMUM
INCREMENT
5
1
5
1
1
10:11a, Fri
Jun 12, 2015
2
2
10:11a, Fri
Jun 12, 2015
3
4
10:11a, Fri
Jun 12, 2015
Values displayed on the screen are for
illustrative purposes only.
SETTING VIBRATION MODE
The
Set Vibration
screen lets you change alarm notifications from audible tones to a vibration. However, if a low-
or medium-priority vibrating alarm occurs and is not resolved in 60 seconds, an audible alarm occurs. For a high-
priority alarm, an audible tone immediately occurs with a vibration alarm with no delay.
On the
Utilities Menu
screen, touch
Set Vibration
.
On the
Set Vibration
screen, touch
ON
or
OFF
.
When you are finished, touch
OK
.
In the message asking if the settings are
OK
, touch
CONFIRM
.
NOTE:
Changes to settings only take effect when you touch
CONFIRM
.
Check that the
Vibrate
icon
appears, indicating the ventilator is in
vibrate mode.
VIBRATION SETTINGS SUMMARY
DEFAULT
ALTERNATE
OFF
ON
1
10:11a, Fri
Jun 12, 2015
2
10:11a, Fri
Jun 12, 2015
3
4
10:11a, Fri
Jun 12, 2015
10:11a, Fri
Jun 12, 2015
5
