manualshive.com logo in svg

Hillrom Breathe LIFE2000, Instructions For Use Manual, Page: 42 / 82

Share
Download
Hillrom Breathe LIFE2000 Instructions For Use Manual Download Page 42

75

76

VENTILATION SETTINGS

6

VENTILATION SETTINGS

6

VIEWING SOFTWARE VERSION INFORMATION

The Information screen displays information about the ventilator and its operation.

  

On any screen, touch the 

Wrench

 button.

  

On the 

Menu

 screen, touch 

Information

.

  

The screen displays information about the ventilator and its operation.
•  Software Version is the version of software currently running on the 

ventilator.

•  Serial Number is the ventilator's serial number.
•  Operating Time is the total time the ventilator has been powered on.
•  High Activity Time is the time the ventilator has delivered therapy using 

the High Activity prescription.

•  Medium Activity Time is the time the ventilator has delivered therapy  

using the Medium Activity prescription.

•  Low Activity Time is the time the ventilator has delivered therapy using the Low Activity prescription.
•  Total Activity Time is the total time the ventilator has delivered therapy using any of the three 

prescriptions (Total Activity Time = High Activity Time + Medium Activity Time + Low Activity Time).

These screen values are accurate to within two minutes.

20.0

7.5

15

500 ml

Air  LPM

PIP  cmH

2

O

Breath/min

10:11a, Fri

Jun 12, 2015

1

2

10:11a, Fri

Jun 12, 2015

10:11a, Fri

Jun 12, 2015

Information

Life2000 Ventilator

Software Version

     

BT-V5 XX.XX.XX.XX

Serial Number: XXXXXXXX-XXX   CRC: XXXXXXXX
Operating Time:    

           13 hrs   48 min

High Activity Time:               0 hrs  36 min
Medium Activity Time:             2 hrs  11 min
Low Activity Time:    

            0 hrs    0 min

Total Activity Time:               2 hrs   47 min

Values displayed on the screen are for  

illustrative purposes only.

Values displayed on the screen are for  

illustrative purposes only.

ADJUSTING SCREEN BRIGHTNESS

  

On the 

Utilities Menu

 screen, touch 

Set Brightness

.

  

Touch the 

Up

 arrow to increase the brightness or the 

Down

 arrow to 

decrease it. Pressing and holding an arrow button will continue to increase or 

decrease the value.

 

 

You can choose a brightness level between 1 and 5, with 5 being the 

brightest and 1 the dimmest.

  

When you are finished, touch 

OK

.

  

In the message asking if the settings are 

OK

, touch 

CONFIRM

.

BRIGHTNESS SETTINGS SUMMARY

DEFAULT

MINIMUM

MAXIMUM

INCREMENT

3

1

5

1

10:11a, Fri

Jun 12, 2015

1

2

2

10:11a, Fri

Jun 12, 2015

3

4

10:11a, Fri

Jun 12, 2015

Values displayed on the screen are for  

illustrative purposes only.

Summary of Contents for Breathe LIFE2000



















































































Reviews:

No comments