Hillenbrand Hill-Rom Advanta User Manual Download Page 5

Page: 5 / 54

Typographical Conventions

This manual contains different typefaces and icons designed to improve readability and increase
understanding of its content. Note the following examples:

•

Standard text—used for regular information.

•

Boldface text—emphasizes a word or phrase.

•

NOTE:—sets apart special information or important instruction clarification.

•

The symbol below highlights a WARNING or CAUTION:

Warning and Caution

–

A WARNING identifies situations or actions that may affect patient or user safety.
Disregarding a warning could result in patient or user injury.

–

A CAUTION points out special procedures or precautions that personnel must follow to
avoid equipment damage.

•

The symbol below highlights a CAUGHT HAZARD WARNING:

Caught Hazard Warning

•

The symbol below highlights a CHEMICAL HAZARD WARNING:

Chemical Hazard Warning

•

The symbol below highlights an ELECTRICAL SHOCK HAZARD WARNING:

Electrical Shock Hazard Warning

Summary of Contents for Hill-Rom Advanta























































Search results

Summary of Contents for Hill-Rom Advanta

Reviews:

Related manuals for Hill-Rom Advanta

Brands by name

Popular brands

Hillenbrand Hill-Rom Advanta, User Manual

Search results

Summary of Contents for Hill-Rom Advanta

Reviews:

Related manuals for Hill-Rom Advanta

Brands by name

Popular brands