manualshive.com logo in svg

Hillenbrand Hill-Rom Advanta, User Manual

Share
Download
Hillenbrand Hill-Rom Advanta User Manual Download Page 33

Standard Features

29

Standard Features

Headboard

The headboard is connected to the 
bed frame at the head end of the 
bed. The headboard can be removed 
to gain increased access to the 
patient’s upper body area, and can 
be used as an emergency backboard 
during CPR procedures.

Removal: Grasp the hand holds 

firmly and lift up.

Installation: Using the guide 

arrows, align the 
headboard sockets 
with the posts on the 
bed frame, and lower 
the headboard onto 
the bed frame.

NOTE:

If necessary, gently push the 
headboard down until it rests on the 
bed frame.

Footboard

The footboard is attached to the bed frame at the foot end of the bed. It 
houses several of the bed controls in the footboard control panel. The 
footboard can be removed for cleaning and maintenance.

Removal: To remove the footboard, remove the safety pins (if installed) 

and grasp the footboard by its handles and lift upwards.

Installation: To install the footboard, align the guide arrows on the 

footboard with the footboard posts, and lower the footboard 
onto the posts and install the safety pins (if installed).

NOTE:

The footboard control panel connectors (located on the bottom center of the 
footboard) will align and connect correctly when the footboard is installed 
correctly on the posts.

Headboard Removal

Headboard Installation

Footboard Removal And Installation

Summary of Contents for Hill-Rom Advanta























































Reviews:

No comments

Brands by name

Popular brands

Load more brands