Hillenbrand Hill-Rom Advanta User Manual Download Page 32 | Manualshive

Page: 32 / 54

background image

Caregiver Controls

28

Indicator Lights

Indicator lights are used to inform caregivers of important information
concerning the Advanta™ Bed. Most of the indicator lights are located
on the footboard control panel.

Motor Power Off: The Motor Power Off indicator light illuminates
when the All Motors lockout is activated.

Ground Loss: The Ground Loss indicator light flashes when the
electrical path to ground has unusually high resistance, is open, or if phase and neutral are reversed.

Brake Not Set: The Brake Not Set indicator light flashes when the brakes are not fully engaged. Unless the bed is
being moved intentionally, the brakes should always be applied to minimize potential safety hazards. This indicator
light is also located on the left, caregiver, head-end siderail (beds with PPM option only).

Bed Not Down: When the Bed Not Down indicator light is illuminated, it means the bed is not at its lowest position. For
enhanced patient safety, it is recommended that the bed be in the lowest position unless a caregiver is present. An
indicator light is also located on the left, caregiver, head-end siderail (beds with PPM option only).

Service Required: The Service Required indicator light flashes when the system detects a malfunction. Refer the
matter to qualified maintenance personnel using the Advanta™ Bed Service Manual.

Surface Power Off: (ZoneAire® Sleep Surface only) The Surface Power Off indicator light flashes when the air system
power is disconnected or turned off.

Heel Relief Off: (ZoneAire® Sleep Surface only) The Heel Relief Off indicator light comes on when the Heel Relief
mode on the ZoneAire® Sleep Surface is inactive.

Siderail Lockout Indicators: The siderail bed functions can be locked out to prohibit unauthorized use. This is done
by selecting the appropriate lockout control on the footboard. When a lockout is engaged, the Lockout indicator on the
siderail illuminate. If a bed function appears inoperative, check to see whether the Lockout indicators are illuminated
before calling for assistance.

Indicator Lights

«
...
30
31
32
33
34
...
»

Summary of Contents for Hill-Rom Advanta























































Reviews:

No comments

Related manuals for Hill-Rom Advanta

Brand: Ecco Pages: 4

Brand: JD Squared Pages: 15

Brand: DAPAudio Pages: 16

Brand: 3M Pages: 28

Brand: Keithley Pages: 32

Brand: jcb Pages: 166

D-IMager EKL3104

Brand: Panasonic Pages: 13

Brand: Labokey Pages: 5

Brand: E-Z Trail Pages: 8

Brand: B&K Pages: 10

Brand: lancer Pages: 12

Brand: Eaton Pages: 2

Brand: Eaton Pages: 20

SC 2 Deluxe EasyFix

Brand: Kärcher Pages: 12

Brand: Kärcher Pages: 16

Brand: Taylor Pages: 41

Brand: FARM-MAXX Pages: 35

Brand: M-system Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands