Hill-Rom TotalCare P1830A, Service Manual, Page: 84 / 92

Preventive Maintenance (Capital Products Only)
Chapter 6: General Procedures
Page 6 - 12 TotalCare® Bariatric Bed Service Manual (man299ra)
Preventive Maintenance Schedule and Checklist
Inspector Name: _______________________ Inspector Signature: ____________________
Inspector Employee Number: _____________ Date Inspected: _________________________
Bed Serial Number: ______________________ Model Number: _________________________
Labor Time: ____________________________ Facility Location: _______________________
Indicate each step as “Pass” or “Fail” in the right-hand column. Pass/Fail
Manual Hydraulic Function Test
•
Unplug the bed from its power source, and verify proper operation of the head
functions.
Disinfect and Inspect The Power Cord
•
Inspect the length of the power cord for cuts and abrasions. Replace as needed.
• Inspect the length of the pendant cord for cuts and abrasions. Replace as
needed.
• Wipe down the entire length of the pendant cord and power cord with a facility-
approved disinfectant.
• Inspect all head end warning labels. Replace labels as needed.
Ground Resistance Check
•
Plug the bed into a properly calibrated safety analyzer, and attach the safety
analyzer to the head end lift arm ground strap.
• Check that electrical ground resistance readings do not exceed the maximum
specification of 200 milliohms.
Leakage Current Check
•
Using a calibrated safety analyzer, verify that the bed’s electrical leakage read-
ings meet the specification of 200 microamps.
G/NP __________ NG/NP _________ G/RP __________ NG/RP __________
• Unplug the bed from the analyzer.
Disinfect and Inspect the Bed’s Head End
•
Plug the bed into an appropriate power source.
• Raise the bed to its highest position.
• Raise the head section 10°, place an angle locator on the head and confirm that
no greater than 3° from left to right exists.
• Inspect for physical damage and missing parts, including the winch tab. Repair
or replace as necessary.
• Inspect the IntelliDrive® Transport System handles for physical damage.
Repair or replace as necessary.
• Verify the head end casters rotate 360° without touching the base frame.