Hill-Rom TotalCare P1830A, Service Manual, Page: 18 / 92

Specifications
Chapter 1: Introduction
Page 1 - 8 TotalCare® Bariatric Bed Service Manual (man299ra)
Specifications
For the TotalCare® Bariatric Bed specifications, see table 1-2 on page 1-8. For
operation and function of the TotalCare® Bariatric Bed, refer to chapter 1 of
the TotalCare® Bed System Service Manual (man112).
Physical Description
Table 1-2. TotalCare® Bariatric Bed Specifications
Feature Dimension
Height—from floor to top of articulating
deck (bottom of mattress) in low position 19.0" (48.3 cm)
Height—from floor to top of articulating
deck (bottom of mattress) in high position 38.0" (96.5 cm)
Minimum under bed clearance 4.25" (108 mm)
1.25" (31.8 mm) (IntelliD-
rive™ Transport System)
Minimum clearance between articulating
deck foot section and the floor for any bed
position, except the tilt-table and the chair
egress positions with the foot section at 90° 2.0" (5.1 cm)
Overall width—siderails raised
Overall width—siderails lowered
Overall width—distance between casters 44.5" (113.0 cm)
42.0" (106.7 cm)
25.5" (64.8 cm)
Overall length 93.5" (237.5 cm)
Overall foot section width 28.88-29.13"
(73.36-73.99 cm)
Fully extended length of the foot section
from pivot to inside of the footboard 26.75-27.25"
(67.95-69.22 cm)
Articulating deck length 81.75-82.25"
(207.65-208.92 cm)
Maximum head elevation 75°
Maximum knee elevation 20°
Maximum foot elevation 85° down
Maximum foot retract 12" (30 cm)
Maximum Trendelenburg 15°
Maximum Reverse Trendelenburg 15°