Hill-Rom TotalCare P1830A, Service Manual, Page: 40 / 92

4.2 Head Siderail
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 8 TotalCare® Bariatric Bed Service Manual (man299ra)
4.2 Head Siderail
Tools required: T25 Torx®
1
head screwdriver
Hi-Lo cylinder brace (P/N SA1695)
Small screwdriver
Removal
1. Set the brakes.
2. Raise the bed to its highest position.
SHOCK HAZARD:
Unplug the unit from its power source. Failure to do so could result in
personal injury or equipment damage.
3. Unplug the bed from its power source.
SHOCK HAZARD:
Disable the battery. Failure to do so could result in personal injury or
equipment damage.
4. Disable the battery.
5. Remove the head end covers. Refer to “Cover—Head End” in the
TotalCare® Bed System Service Manual (man112) .
6. Install the Hi-Lo cylinder braces. Refer to “Hi-Lo Cylinder Brace—
SA1695” in the TotalCare® Bed System Service Manual (man112) .
7. Raise the head siderail.
8. Unplug the siderail cable from the weigh frame junction box.
9. Remove the cable ties that secure the siderail cable to the frame.
10. Remove the siderail cable from the frame.
a. For the left-hand siderail, reference junction board connector P1.
b. For the right-hand siderail, reference junction board connector P7.
1. Torx® is a registered trademark of Textron, Inc.