Steps
1. Click Configuration → Turnstile → Basic Parameters to enter the page.
Figure 7-16 keyfob
2. View the keyfob working status.
3. Set Working Mode as One-to-One or One-to-Many.
4. Add keyfob.
1) Click Add and the keyfob adding window will pop up.
2) Enter the Name and Serial No..
3) Check to enable Remain Open Permission at your actual needs.
4) Click OK to add the keyfob.
5. Optional: Select a keyfob and click Delete to delete the keyfob.
6. Click Save.
IR Detector
Set IR detector.
Steps
1. Click Configuration → Turnstile → IR Detector to enter the page.
Figure 7-17 IR Detector
2. Set the entrance and exit inductive mode as Single Triggered or Triggered Simultaneously.
3. Set custom IR detector mode.
Enable IR Emergency Mode
DS-K3B961TX Series Swing Barrier User Manual
67
Summary of Contents for DS-K3B961TX Series
