Steps
1. Go to Configuration → System → Security → Certificate Management .
2. In the Import Passwords and Import Communication Certificate areas, select certificate type
and upload certificate.
3. Click Install.
Install CA Certificate
Before You Start
Prepare a CA certificate in advance.
Steps
1. Go to Configuration → System → Security → Certificate Management .
2. Create an ID in the Inport CA Certificate area.
Note
The input certificate ID cannot be the same as the existing ones.
3. Upload a certificate file from the local.
4. Click Install.
7.8.10 Change Administrator's Password
Steps
1. Click Configuration → User Management .
2. Click .
3. Enter the old password and create a new password.
4. Confirm the new password.
5. Click OK.
Caution
The password strength of the device can be automatically checked. We highly recommend you
change the password of your own choosing (using a minimum of 8 characters, including at least
three kinds of following categories: upper case letters, lower case letters, numbers, and special
characters) in order to increase the security of your product. And we recommend you change
your password regularly, especially in the high security system, changing the password monthly
or weekly can better protect your product.
Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
DS-K3B961TX Series Swing Barrier User Manual
49
Summary of Contents for DS-K3B961TX Series
