3. Select EHome as the adding mode.
4. Enter the required information.
Device Account
Enter the account name registered on EHome protocol.
EHome Key
For EHome 5.0 devices, enter the EHome key if you have set it when configuring network
center parameter for the device.
Note
This function should be supported by the device.
5. Optional: Check Synchronize Time to synchronize the device time with the PC running the client
after adding the device to the client.
6. Optional: Check Import to Group to create a group by the device name, and import all the
channels of the device to the group.
7. Finish adding the device.
-
Click Add to add the device and go back to the device list.
-
Click Add and New to save the settings and continue to add other device.
Note
Face pictures cannot be applied to devices added by EHome account.
8. Optional: Perform the following operation(s).
Device Status
Click on Operation column to view device status.
Edit Device
Information
Click on Operation column to edit the device information, such as
device name, device account, and EHome key.
Check Online User
Click on Operation column to check the online users who access the
device, such as user name, user type, user's IP address, and login time.
Refresh
Click on Operation column to get the latest device information.
Delete Device
Select one or multiple devices and click Delete to delete the selected
device(s) from the client.
Import Devices in a Batch
The devices can be added to the software in a batch by entering the device information in the pre-
defined CSV file.
Steps
1. Enter the Device Management page
2. Click Add to open the adding device window.
3. Select Batch Import as the adding mode.
4. Click Export Template and then save the pre-defined template (CSV file) on your PC.
DS-K1T341C Series Face Recognition Terminal User Manual
132
