HIKVISION DS-96NI-ST User Manual Download Page 87

Page: 87 / 256

User Manual of Network Video Recorder

5.9

Files Protection

Purpose:

You can lock the recording files or set the HDD property to Read-only to protect the record files from being

overwritten.

5.9.1

Locking the Recording Files

Lock File when Playback

Steps:

Enter Playback interface.

Menu> Playback

Check the checkbox of channel(s) in the channel list and then double-click to select a date on the calendar.

Figure 5. 29

Normal Playback

During playback, click the

button to lock the current recording file.

In the multi-channel playback mde, clicking the

button will lock all the record files related to the

playback channels.

You can click the

button to pop up the file management interface. Click the

Locked File

tab to check

and export the locked files.

Summary of Contents for DS-96NI-ST

































































































































































































































































Search results

Summary of Contents for DS-96NI-ST

Reviews:

Related manuals for DS-96NI-ST

Brands by name

Popular brands

HIKVISION DS-96NI-ST, User Manual

Search results

Summary of Contents for DS-96NI-ST

Reviews:

Related manuals for DS-96NI-ST

Brands by name

Popular brands