HIKVISION DS-96NI-ST User Manual Download Page 111

Page: 111 / 256

User Manual of Network Video Recorder

110

7.1.2

Backing up by Normal Video/Picture Search

Purpose:

The record files can be backup to various devices, such as USB devices (USB flash drives, USB HDDs, USB

writer), SATA writer and e-SATA HDD.

The eSATA HDD is supported by DS-9600NI-I8 series NVRonly.

Backup using USB flash drives and USB HDDs

Steps:

Enter Export interface.

Menu>Export>Normal/Picture

Select the cameras to search.

Set search condition and click

Search

button to enter the search result interface. The matched video files or

pictures are displayed in Chart or List display mode.

Figure 7. 5

Normal Video Search for Backup

Select video files or pictures from the Chart or List to export.

Click

to play the record file if you want to check it.

Check the checkbox before the record files you want to back up.

The size of the currently selected files is displayed in the lower-left corner of the window.

Summary of Contents for DS-96NI-ST

































































































































































































































































Search results

Summary of Contents for DS-96NI-ST

Reviews:

Related manuals for DS-96NI-ST

Brands by name

Popular brands

HIKVISION DS-96NI-ST, User Manual

Search results

Summary of Contents for DS-96NI-ST

Reviews:

Related manuals for DS-96NI-ST

Brands by name

Popular brands