HIKVISION DS-96NI-ST User Manual Download Page 17

Page: 17 / 256

User Manual of Network Video Recorder

No.

Name

Function Description

REC/SHOT

Enters the Manual Record settings menu.

Presses this button followed by a numeric button to call a PTZ

preset in PTZ control settings.

Turns audio on/off in the playback mode.

PLAY/AUTO

Enters the playback mode.

Automatically scans in the PTZ control menu.

ZOOM+

Zooms in the PTZ camera in the PTZ control setting.

A/FOCUS+

Adjusts focus in the PTZ Control menu.

Switches between input methods (upper and lower case alphabet,

symbols and numeric input).

EDIT/IRIS+

Edits text fields. When editing text fields, it also deletes the

character in front of the cursor.

Checks

the checkbox in the checkbox fields.

Adjusts the iris of the camera in PTZ control mode.

Generates video clips for backup in playback mode.

Enters/exits the folder of USB device and eSATA HDD.

MAIN/SPOT/ZOO

M-

Switches between main and spot output.

Zooms out the image in PTZ control mode.

F1/ LIGHT

Selects all items on the list when used in a list field.

Turns on/off PTZ light

(if applicable) in PTZ control mode.

Switches between play and reverse play in playback mode.

F2/ AUX

Cycles through tab pages.

Switches between channels in synchronous playback mode.

MENU/WIPER

Returns to the Main menu (after successful login).

Presses and holds the button for five seconds to turn off audible

key beep.

Starts wiper (if applicable) in PTZ control mode.

Shows/hides the control interface in playback mode.

PREV/FOCUS-

Switches between single screen and multi-screen mode.

Adjusts the focus in conjunction with the A/FOCUS+ button in

PTZ control mode.

PTZ/IRIS-

Enters the PTZ Control mode.

Adjusts the iris of the PTZ camera in PTZ control mode.

Control

Buttons

DIRECTION

Navigates between different fields and items in menus.

In the playback mode, use the Up and Down buttons to speed up

and slow down recorded video. Use the Left and Right buttons

to select the next and previous video files.

Cycles through channels in live view mode.

Controls the movement of the PTZ camera in PTZ control mode.

ENTER

Confirms selection in any of the menu modes.

Checks the

checkbox fields.

Plays or pauses the video playing in playback mode.

Summary of Contents for DS-96NI-ST

































































































































































































































































Search results

Summary of Contents for DS-96NI-ST

Reviews:

Related manuals for DS-96NI-ST

Brands by name

Popular brands

HIKVISION DS-96NI-ST, User Manual

Search results

Summary of Contents for DS-96NI-ST

Reviews:

Related manuals for DS-96NI-ST

Brands by name

Popular brands