HIKVISION DS-7600 Series User Manual Download Page 72

Page: 72 / 236

User Manual of DS-9600/8600/7700/7600 Series NVR

5.2

Configuring Record/Capture Schedule

Purpose:

Set the record schedule, and then the camera automatically starts/stops recording according to the

configured schedule.

Note:

In this chapter, we take the record schedule procedure as an example, and the same

procedure can be applied to configure schedule for both recording and capture. To schedule the

automatic capture, you need to choose the Capture tab in the

Schedule

interface.

Steps:

Enter the Record Schedule interface.

Menu>Record/Capture>Schedule

Configure Record Schedule

Select Record/Capture Schedule.

Figure 5. 6

Record Schedule

Choose the camera you want to configure.

Select the check box after the

Enable Schedule

item.

Click

Edit

button or click on the color icon under the edit button and draw the schedule

line on the panel.

Edit the schedule:

In the message box, you can choose the day to which you want to set

schedule.

Summary of Contents for DS-7600 Series













































































































































































































































Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands

HIKVISION DS-7600 Series, User Manual

Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands