HIKVISION DS-7600 Series User Manual Download Page 222

Page: 222 / 236

User Manual of DS-9600/8600/7700/7600 Series NVR

221

14.2

Configuring General Settings

Purpose:

You can configure the BNC output standard, VGA output resolution, mouse pointer speed through

the Menu > Configuration > General interface.

Steps:

Enter the General Settings interface.

Menu >Configuration> General

Select the

General

tab.

Figure 14. 2

General Settings Interface

Configure the following settings:

•

Language:

The default language used is

English

•

CVBS Output Standard:

Select the CVBS output standard to NTSC or PAL, which

must be the same with the video input standard.

•

VGA Resolution:

Select the VGA output resolution, which must be the same with

the resolution of the monitor screen.

•

HDMI Resolution:

Select the HDMI resolution, which must be the same with the

resolution of the monitor screen.

•

Time Zone:

Select the time zone.

•

Date Format:

Select the date format.

•

System Date:

Select the system date.

•

System Time:

Select the system time.

•

Mouse Pointer Speed:

Set the speed of mouse pointer; 4 levels are configurable.

•

Enable Wizard:

Enable/disable the Wizard when the device starts up.

•

Enable Password:

Enable/disable the use of the login password.

Click the

Apply

button to save the settings.

Summary of Contents for DS-7600 Series













































































































































































































































Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands

HIKVISION DS-7600 Series, User Manual

Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands