HIKVISION DS-7600 Series User Manual Download Page 50

Page: 50 / 236

User Manual of DS-9600/8600/7700/7600 Series NVR

screens

Previous screen: left/up direction button.

Auto-switch

Press

Enter

button.

All-day playback

Press

Play

button.

Switch

between

main

and

aux

output

Press

Main/Aux

button.

3.2.2

Using the Mouse in Live View

Table 3. 4

Mouse Operation in Live View

Name

Description

Menu

Enter the main menu of the system by right clicking the mouse.

Single Screen

Switch to the single full screen by choosing channel number from the

dropdown list.

Multi-screen

Adjust the screen layout by choosing from the dropdown list.

Previous Screen

Switch to the previous screen.

Next Screen

Switch to the next screen.

Start/Stop

Auto-switch

Enable/disable the auto-switch of the screens.

Start Recording

Start normal recording or motion detection recording of all channels.

All-day Playback

Playback the video of the selected channel.

Output Mode

Four modes of output supported, including Standard, Bright, Gentle and

Vivid.

Aux Monitor

Switch to the auxiliary output mode and the operation for the main

output is disabled.

Note:

The

dwell time

of the live view configuration must be set before using

Start Auto-switch

Note:

If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation

is disabled; you need to switch back to the Main output with the MAIN/AUX button on the front

panel or remote.

Note:

If the corresponding camera supports intelligent function, the Reboot Intelligence option is

included when right-clicking mouse on this camera.

Summary of Contents for DS-7600 Series













































































































































































































































Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands

HIKVISION DS-7600 Series, User Manual

Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands