HIKVISION DS-7600 Series User Manual Download Page 214

Page: 214 / 236

User Manual of DS-9600/8600/7700/7600 Series NVR

213

You can click the

button of each log or double click it to view its detailed information, as

shown in Figure 13. 9. And you can also click the

button to view the related video files

if available.

Figure 13. 9

Log Details

If you want to export the log files, click the

Export

button to enter the Export menu, as

shown in Figure 13. 10.

Figure 13. 10

Export Log Files

Select the backup device from the dropdown list of

Device Name

Click the

Export

to export the log files to the selected backup device.

You can click the

New Folder

button to create new folder in the backup device, or click the

Format

button to format the backup device before log export.

Notes:

Please connect the backup device to NVR before operating log export.

The log files exported to the backup device are named by exporting time, e.g.,

20110514124841logBack.txt

Summary of Contents for DS-7600 Series













































































































































































































































Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands

HIKVISION DS-7600 Series, User Manual

Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands