HIKVISION DS-7600 Series User Manual Download Page 120

Page: 120 / 236

User Manual of DS-9600/8600/7700/7600 Series NVR

119

Figure 7. 13

Export Finished

Check backup result.

Choose the record file in Export interface and click button

to check it.

Note:

The Player player.exe will be exported automatically during record file export.

Figure 7. 14

Checkup of Export Result using USB Writer

Backup using eSATA HDDs

Note:

The DS-7600NI-SE(/N) does not support this function.

Steps:

Enter Record>Advanced and set the working mode of eSATA HDD at “Export”.

Menu>Record>Advanced

Choose eSATA and set its mode at Export. Click

Yes

when pop-up message box “System

will reboot automatically if the usage of eSATA is changed. Continue?”

Note:

The working modes of eSATA HDD contain Record/Capture and Export. And

changes in working mode will take effective after rebooting the device.

Enter Export interface.

Menu>Export>Normal

Set search condition and click

Search

button to enter the search result interface.

Summary of Contents for DS-7600 Series













































































































































































































































Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands

HIKVISION DS-7600 Series, User Manual

Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands