HIKVISION DS-7600 Series User Manual Download Page 216

Page: 216 / 236

User Manual of DS-9600/8600/7700/7600 Series NVR

215

13.3

Importing/Exporting Configuration Files

Purpose:

The configuration files of the NVR can be exported to local device for backup; and the

configuration files of one NVR can be imported to multiple NVR devices if they are to be

configured with the same parameters.

Steps:

Enter the Import/Export Configuration File interface.

Menu > Maintenance >Import/Export

Figure 13. 12

Import/Export Config File

Click the

Export

button to export configuration files to the selected local backup device.

To import a configuration file, select the file from the selected backup device and click the

Import

button. After the import process is completed, you must reboot the NVR.

Note:

After having finished the import of configuration files, the device will reboot

automatically.

Summary of Contents for DS-7600 Series













































































































































































































































Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands

HIKVISION DS-7600 Series, User Manual

Search results

Summary of Contents for DS-7600 Series

Reviews:

Brands by name

Popular brands