HIKVISION DS-6401HDI Series, User Manual

Page: 18 / 35

17
Commands Description:
Commands Utilities
helpm Console help command is used to print common commands, show as Figure 3.2.
getIp Show the current IP address of decoder. Command format: getIp “Enter”.
setIp Setup decoder IP address.
Command format: setIp IP: mask, e.g. setIp 192..168.1.10:255.255.255.0
getGateway Show current decoder gateway address. Command format: getGateway “Enter”.
setGateway Setup decoder gateway.
Command format: setGateway Gateway, e.g. setGateway 192.168.1.10
getTime Show decoder current time. Command format: getTime “Enter”.
setTime Setup decoder time. Command format: setTime 2009-4-15: 15: 30: 00
showBootTime Show decoder boot time. Command format: showBootTime “Enter”.
showUserInfo Show decoder current user information. Command format: showUserInfo “Enter”.
Note: For other commands, please consult our technical engineers.